The DEEP DRILLER, loaded as shown in the Sample Load Form #4 (Drilling), discharges a non-liquid load of 275.8 long tons from a position 130 feet above the keel, 40 feet forward of amidships, and 30 feet to port of the centerline. What is the resulting trim angle?
A
3.49 degrees to the stern
B
4.69 degrees to the stern
C
5.18 degrees to the stern
D
5.68 degrees to the stern
E
İlgili Sorular
The speed at which an ocean wave system advances is called __________.While underway, if you are required to have a radiotelephone, you must maintain a continuous list...For an OSV not on an international voyage, an approved substitute for an impulse projected type line...Survival craft required on a steel small passenger vessel§operating in cold water must _____________...Where do you obtain approved placards containing instructions for the launching and inflation of an ...