It is proposed to moor the DEEP DRILLER in 600 feet of water in a region in which the effective wind velocity could reach 80 knots, significant wave height could reach 30 feet, and the current could be 1.5 knots. If these conditions occurred at the same time from the beam, the total environmental force would be ______________.
A
620 kips
B
595 kips
C
475 kips
D
425 kips
E
İlgili Sorular
A semisubmersible which flops between forward and aft trim angles is likely to have _______.The DEEP DRILLER, while loaded as shown in the Sample Load Form #4 (Drilling), suffers damage to the...Using a safety factor of 6, determine the safe working load of a line with a breaking strain of 30,0...According to 46 CFR Subchapter T, where practicable§carburetor drip collectors should drain to _____...BOTH INTERNATIONAL & INLAND Your 15-meter tug is underway and crossing a deep and narrow channel. A...